Discussion Post your Acorn ZenProtocol standalone miner results here

[vapourminer]

since its been kinda hard to find numbers in once place, maybe here can serve so we can see how our acorns are doing compared to others. if anyone post a screenie or numbers will try to update this post with your numbers best I can. zen protocol only

please post this info: ACORN MODEL, BITSTREAM VER, TEMP, MHZ, MH/s, VCCint, what its in (x4, x2, m2), fail percentage

there seem to be some "sweet spot" frequencies for the 215+ on 012d.. try 195, 208. these are numbers from discord, and many people have had good luck.. lower temps and lower fails.

vapourminer (updated 12 dec 2018 -- switched to 208 mhz for the 215+, stable 24+ hours now))
215+,   012c,   56*C,  208 Mhz,  416   MH/s,  0.93v,  0.0%, x4 nest
215+,   012c,   51*C,  208 Mhz,  416   MH/s,  0.96v,  0.0%, x4 nest (with thermal pad, reversed fan)
101,    012c,   74*C,  115 Mhz,  86.25 MH/s,  1.00v,  8.5%, x4 nest

Carl T
215+,   012c?,   64*C,  172 Mhz,  344  MH/s,  0.94v,  0.0%, unknown (x2G?)
215+,   012c?,   63*C,  172 Mhz,  344  MH/s,  0.93v,  0.0%, unknown (x2G?)

 

[Carl T]

x2 215+
I/ACORNMINER : A-1(135c145c): Temp: 63.74 C, VCCINT: 0.94 V, Shares(F/A/I/R/L): 806/263/0/0/542, Clk: 172.00 MHz, Core Hashrate: 344.00 MH/s
I/ACORNMINER : A-2(165c175c): Temp: 64.10 C, VCCINT: 0.93 V, Shares(F/A/I/R/L): 791/244/0/0/548, Clk: 172.00 MHz, Core Hashrate: 344.00 MH/s

Temps fluctuate in the current environment a bit tho.

 

[Dream]

Setup the first solo mining rig yesterday, using 215+ only

I/ACORNMINER   : A-1(ced7cfd7): Temp: 73.58 C, VCCINT: 0.97 V, Shares(F/A/I/R/L): 0/0/0/0/0, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-2(d1d7d2d7): Temp: 70.38 C, VCCINT: 0.98 V, Shares(F/A/I/R/L): 1/0/0/0/1, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-3(d4d7d5d7): Temp: 67.92 C, VCCINT: 0.99 V, Shares(F/A/I/R/L): 1/0/0/0/1, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-4(d7d7d8d7): Temp: 76.90 C, VCCINT: 1.00 V, Shares(F/A/I/R/L): 0/0/0/0/0, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-5(dad7dbd7): Temp: 67.80 C, VCCINT: 0.95 V, Shares(F/A/I/R/L): 0/0/0/0/0, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-6(ddd7ded7): Temp: 68.17 C, VCCINT: 0.95 V, Shares(F/A/I/R/L): 1/0/0/0/1, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-7(e0d7e1d7): Temp: 66.57 C, VCCINT: 0.96 V, Shares(F/A/I/R/L): 1/0/0/0/1, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-8(e3d7e4d7): Temp: 74.07 C, VCCINT: 0.96 V, Shares(F/A/I/R/L): 0/0/0/0/0, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-9(e6d7e7d7): Temp: 69.40 C, VCCINT: 0.99 V, Shares(F/A/I/R/L): 2/0/0/0/2, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-10(e9d7ead7): Temp: 66.81 C, VCCINT: 0.96 V, Shares(F/A/I/R/L): 0/0/0/0/0, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-11(ecd7edd7): Temp: 65.34 C, VCCINT: 0.99 V, Shares(F/A/I/R/L): 0/0/0/0/0, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-12(efd7f0d7): Temp: 66.07 C, VCCINT: 0.98 V, Shares(F/A/I/R/L): 0/0/0/0/0, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-13(f2d7f3d7): Temp: 68.17 C, VCCINT: 0.99 V, Shares(F/A/I/R/L): 1/0/0/0/1, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-14(f5d7f6d7): Temp: 81.95 C, VCCINT: 0.97 V, Shares(F/A/I/R/L): 1/0/0/0/1, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-15(f8d7f9d7): Temp: 69.52 C, VCCINT: 0.98 V, Shares(F/A/I/R/L): 0/0/0/0/0, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s
I/ACORNMINER   : A-16(fbd7fcd7): Temp: 69.76 C, VCCINT: 0.96 V, Shares(F/A/I/R/L): 2/0/0/0/2, Clk: 160.00 MHz, Core Hashrate: 320.00 MH/s

 

[vapourminer]

Setup the first solo mining rig yesterday, using 215+ only

16 acorns in one rig? lol, nice!

all in x4 nests?

temps and voltages are all over, any mods done or is it just random placement in the rig thats causes that. or just the silicon lottery?

im slowly adding thermal pads to mine. just old pads scrounged around from the the various junk parts i have lying around, and applied mostly under the voltage reg chip between the acorn and nestx4 pcb for now.

 

[CreamyG31337]

1 regular 215 in this rig:

I/ACORNMINER: A-1(8fd80000): Temp: 62.87 C, VCCINT: 1.00 V, Shares(F/A/I/R/L): 332/167/0/0/165, Clk: 333.00 MHz, Core Hashrate: 333.00 MH/s

Can't really go any faster. 334 mhz gives invalid shares and voltage drops to 0.97!

All my 215+ are stable at 190 mhz. Temperatures and voltages are as bad as 0.91v and 80c at times, but they're stable. Not really worth the effort of tweaking them more imo.

 

[Carl T]

since its been kinda hard to find numbers in once place, maybe here can serve so we can see how our acorns are doing compared to others. if anyone post a screenie or numbers will try to update this post with your numbers best I can. zen protocol only

Carl T
215+,   012c?,   64*C,  172 Mhz,  344  MH/s,  0.94v,  0.0%, unknown (x2G?)
215+,   012c?,   63*C,  172 Mhz,  344  MH/s,  0.93v,  0.0%, unknown (x2G?)

Updated.. still not sure what the percentage is though.
215+, 012c, 64*C, 172 Mhz, 344 MH/s, 0.94v, 0.0%??, x2G
215+, 012c, 63*C, 172 Mhz, 344 MH/s, 0.93v, 0.0%??, x2G

Might have to try the "sweet spot" numbers to see if true (12d is available on discord?). When 174 was unstable, I settled for 172 and has been running for days with no issue. Hoping the Nest x4 will help (mobo is junk), else they're gettin dunked in mineral oil.
Link to discord?

Tossed my acorns into an x4 with the same crummy case and mobo, twice the hashes I may try higher, but I don't feel like a reboot just yet.
215+, 012c, 71.49 C, 172 Mhz, 344 MH/s, 0.92 V, 0.0%??, x4G
215+, 012c, 70.38 C, 172 Mhz, 344 MH/s, 0.89 V, 0.0%??, x4G
215+, 012c, 65.46 C, 172 Mhz, 344 MH/s, 0.93 V, 0.0%??, x4G
215+, 012c, 64.10 C, 172 Mhz, 344 MH/s, 0.93 V, 0.0%??, x4G
Down to 0 working now... one visibly blew up. not sure why... titanium plus power supply. Time to test the warranty I guess.
Yeah, the whole board fried... hoping they'll replace the thing.

 

[lil-mine]

Ive slowed mine back down due to heat induced crashes. I need to rework the rig but waiting heatsinks! Have been working on getting accepted shares.

 

[Carl T]

Maybe this applies (wiring the caps in series)? As when they go, they often go closed.

 

[epicfpga]

012d

Wait there's a 12d?

 

[Carl T]

Wait there's a 12d?

Maybe on discord? Or typo? I've been hunting for the discord link... all broken so far

 

[vapourminer]

Wait there's a 12d?

nope. typo. 012c is the latest. sorry

 

[epicfpga]

Here's some speeds for you, running two 215+s on an x2 nest in the primary slot of a Gigabyte GA-H110-D3A with linux version 012c on hiveos.

I/ACORNMINER   : Stratum Message Received
I/ACORNMINER   : Share Accepted!
I/ACORNMINER   : A-1(46b447b4): Temp: 65.70 C, VCCINT: 0.94 V, Shares(F/A/I/R/L): 7838/2324/0/2/5518, Clk: 195.00 MHz, Core Hashrate: 390.00 MH/s                                                                  
I/ACORNMINER   : A-2(49b44ab4): Temp: 71.61 C, VCCINT: 0.96 V, Shares(F/A/I/R/L): 7004/2042/0/3/4953, Clk: 170.00 MHz, Core Hashrate: 340.00 MH/s                                                                  
I/ACORNMINER   : Total Hashrate: 730.00 MH/s

 

[Carl T]

I don't think i'll be using my GigaByte board again, or maybe it is a good test... I don't want to fry anything else though. Going to have to unwatch in favor of my mental health lols at least until I get some results from submitting to their contact form.
Yay! I called & SQRL says they'll send me some replacements! .. There also may be some delay with the x4s now. And cvp hasn't been forgotten, maybe soon to ship.
Back in action with the new x4 nest (Same mobo). It can probably run a bit quicker, but the heat goes over 90c sometimes.
Without extra heat 165 mhz is stable across the board